Building a Pellet Store Room for a P4 Pellet Boiler

Below are some photos showing  a Froling P4 customer building a pellet store room.

Room Details: The room is 8’ X 10’. It is built out of 2X6’s with all interior walls covered with 3/4” plywood. The sloped floors are also covered with slippery masonite. The exterior is covered with 7/16” OSB. There is a small access door for inspection and manual filling if needed. The Froling Eco Pellet Box was used for hose connections. There are three pick-up points located in the room’s trough.
Capacity: Approximately 15 tons.

100_3500

100_3525100_3527 

100_3530

100_3545 100_3532

P4 Pellet_Universalsaugsystem

One thought on “Building a Pellet Store Room for a P4 Pellet Boiler

Leave a Reply

Your email address will not be published. Required fields are marked *